AWP vs WAC vs NADAC comes down to this: AWP (average wholesale price) and WAC (wholesale acquisition cost) are published list prices, while NADAC (National Average Drug Acquisition Cost) is a government survey of what retail pharmacies actually pay for drugs. Most long-term care pharmacy contracts price drugs as a discount off AWP, which sits far above what pharmacies pay, especially for generics. Knowing the gap between the three is the first step to knowing whether your contract price is fair.
What is AWP (average wholesale price)?
Average wholesale price (AWP) is a list price for a drug, published by commercial drug-pricing compendia. Despite the name, it is not an average of anything pharmacies pay.
AWP has a long history of controversy. CMS's NADAC methodology document explains that AWP was "the subject of much scrutiny and litigation over concerns that many AWPs were artificially inflated," and that the Office of Inspector General found AWP-based reimbursement "fundamentally flawed." Many state Medicaid programs moved away from it for that reason.
Long-term care pharmacy contracts still use it. A typical brand formula reads "AWP minus X%." The discount looks generous. Whether it is depends entirely on how far AWP sits above real cost for that drug.
What is WAC (wholesale acquisition cost)?
Wholesale acquisition cost (WAC) is the manufacturer's list price to wholesalers. Unlike AWP, it has a statutory definition. Federal law defines it as the manufacturer's list price "to wholesalers or direct purchasers in the United States, not including prompt pay or other discounts, rebates or reductions in price" (42 U.S.C. 1395w-3a(c)(6)(B)).
WAC is closer to reality than AWP for brand drugs. It is still a list price. Pharmacies and wholesalers may pay less after discounts that never appear on a price list.
What is NADAC (National Average Drug Acquisition Cost)?
NADAC is a per-unit price published by CMS that estimates what retail pharmacies pay to buy a drug. According to the CMS methodology, a contractor surveys a random monthly sample of independent and chain retail community pharmacies and collects their drug invoice prices. The NADAC data is free and is updated weekly (Medicaid.gov NADAC page).
Three limits matter for a nursing home:
- Retail only. Only chain and independent retail community pharmacies are surveyed. Closed-door and specialty pharmacies are excluded, and long-term care pharmacies are not a separate survey group.
- Invoice price only. Discounts or rebates not shown on the invoice line are not counted.
- Ingredient cost only. NADAC is the cost of the drug, not the cost of packaging, delivery, 24-hour service or a pharmacist's time.
How do AWP, WAC and NADAC compare?
| AWP | WAC | NADAC | |
|---|---|---|---|
| What it is | Published list price | Manufacturer list price to wholesalers | Survey of retail pharmacy invoice prices |
| Who publishes it | Commercial compendia | Manufacturers, via compendia | CMS (Medicaid.gov) |
| Defined in law | No | Yes, 42 U.S.C. 1395w-3a | Survey authority in Social Security Act 1927(f) |
| Free to access | No, licensed | No, licensed | Yes |
| Reflects discounts | No | No | Only on-invoice discounts |
| Common use in LTC contracts | Brand and generic formulas | Brand formulas (WAC plus X%) | Rarely in contracts; useful as a check |
What could your building recover?
Two numbers, instant estimate. No email needed.
How far apart are AWP, WAC and NADAC?
CMS publishes a quarterly comparison of NADAC to WAC and AWP. In the NADAC Equivalency Metrics for the quarter ending September 2026:
| Drug type | NADAC vs WAC (mean) | NADAC vs AWP (mean) | NADAC vs AWP (median) |
|---|---|---|---|
| Brand legend drugs | 5.1% below | 21.0% below | 20.3% below |
| Generic legend drugs | 47.6% below | 83.9% below | 91.8% below |
Two lessons follow.
For brands, the three prices sit fairly close together. An AWP discount in the low twenties lands near what retail pharmacies pay.
For generics, AWP is almost irrelevant to cost. The same CMS file shows the gap widens as more manufacturers make a drug: for generics with 11 or more labelers, the median NADAC was 97.1% below AWP. An AWP discount that sounds strong can still leave a very large spread on a common generic. CMS notes that these aggregate figures are not meant for direct reimbursement, and they are averages, not your drugs.
What does this mean for an LTC pharmacy contract?
The pharmacy services agreement usually sets brand prices off AWP or WAC and generic prices off a maximum allowable cost (MAC) list, a pharmacy-maintained price list for generics, sometimes with an AWP fallback. Here is how the benchmarks play out on one tablet.
Illustrative example. These numbers are invented to show the arithmetic, scaled to CMS's average gaps above. They are not real prices for any drug.
| Benchmark | Brand tablet | Generic tablet |
|---|---|---|
| AWP per unit | $10.00 | $1.00 |
| WAC per unit (at average gap) | about $8.32 | about $0.31 |
| NADAC per unit (at average gap) | about $7.90 | about $0.16 |
| Contract price at AWP minus 20% | $8.00 | $0.80 |
| Contract price as multiple of NADAC | about 1.0x | about 5.0x |
The brand price is near acquisition cost. The generic price, under the same formula, is about five times it. That is why a "lesser of" clause (pay the lowest of AWP discount, MAC or another reference) matters so much for generics.
An LTC pharmacy has real costs a retail pharmacy does not: unit-dose packaging, scheduled and STAT deliveries, emergency kits, 24-hour pharmacist access. A fair price sits above NADAC. The question is how far above, and whether your contract says.
How do you check your contract prices against these benchmarks?
- Find the pricing clause. Write down the exact formula for brands, generics and any per diem, including the named reference (AWP or WAC) and the compendium that publishes it.
- Pull line-level invoice data. You need the NDC (the National Drug Code, which identifies product and package), quantity, dispense date and unit price for each line. A summary total cannot be tested. Our guide to reading an LTC pharmacy invoice shows where each field sits.
- Rank by spend. Sort facility-paid lines by total dollars. A small number of drugs usually account for most of the bill.
- Match each NDC to NADAC. Download the NADAC file and look up the per-unit price in effect on the dispense date.
- Compute the multiple. Divide your unit price by NADAC. Flag generics with a high multiple and brands priced above the contract formula.
- Test the formula. For brands, confirm the price matches the contract discount off the reference on that date. That step needs licensed AWP or WAC data.
- Ask in writing. For each flagged line, ask the pharmacy for the reference price and formula it used.
Do this for facility-paid drugs first: Part A residents, and any Medicare Advantage residents whose plan pays you a rate that includes drugs. Those dollars come out of your margin. Our explainer on who pays for drugs during a Part A stay covers which lines are yours.
Free · 48 hours · no integration
Get a free 48-hour pharmacy audit
- Send three files: invoices, census, contract
- See overbilling and Part A exposure, line by line
- BAA signed before any data moves
Who should care most about the gap?
Every operator pays it, but some feel it more. A short-stay or rehab-heavy facility has more Part A days, so more drugs billed to the facility at contract price. A regional operator on one agreement across several buildings multiplies any pricing gap by every building. When the contract comes up for renewal, the benchmark comparison becomes your negotiating file. See 12 questions for your LTC pharmacy before you renew.
This article is general information, not legal advice.
Frequently asked questions
Is AWP higher than WAC?
Usually, yes. CMS's quarterly comparison shows NADAC averaging 21.0% below AWP for brand drugs but only 5.1% below WAC, which means AWP sits above WAC for most brands. For generics, AWP sits much further above both WAC and NADAC.
Is NADAC the same as what my LTC pharmacy pays?
No. NADAC surveys retail community pharmacies, not long-term care pharmacies, and counts only discounts shown on the invoice. It is a free, public reference point, not your pharmacy's cost or a required price.
Where can I look up NADAC for a drug?
CMS publishes NADAC on data.medicaid.gov as a downloadable file, updated weekly. Search by NDC or drug description and use the rate in effect on the dispense date.
Can a nursing home use NADAC in its pharmacy contract?
A contract can name any benchmark both parties agree to, including NADAC plus a fee. Whether that suits your building depends on the services you need and how the rest of the agreement is written. Contract decisions should involve your counsel.
Why do LTC pharmacy contracts still use AWP?
AWP is the benchmark most pharmacy systems and older contracts were built on, and it is published for nearly every NDC. The issue is not using AWP. It is using AWP without a "lesser of" rule or a visible MAC list for generics.
Get the 48-hour first look
Send three months of invoices, your census and your pharmacy services agreement. We compare every facility-paid line against your contract formula and public benchmarks, and show you within 48 hours where the price does not hold up. Start with the free 48-hour audit or estimate your exposure with the savings calculator.