Nursing home pharmacy cost per patient day is facility-paid drug spend divided by facility-responsible resident-days: the days on which the facility, not Part D or Medicaid, owes for the resident's drugs. For most buildings that means covered Medicare Part A days plus any managed care days where the contract puts drugs inside the per diem. Calculated that way, from 12 months of invoices and your census, it is the single most useful number for judging your pharmacy bill.
What is pharmacy cost per patient day?
Pharmacy cost per patient day is what the facility paid its pharmacy for drugs, divided by the resident-days that spending covers. The trap is the denominator.
During a covered Part A stay, drugs are inside Medicare's daily rate under consolidated billing (42 CFR 411.15(p)), so the pharmacy bills the facility. For most long-stay residents, the pharmacy bills Part D, Medicaid or the resident directly. If you divide facility-paid spend by every resident-day in the building, a home with 15% Part A days and a home with 30% Part A days will look wildly different for reasons that have nothing to do with price.
So use facility-responsible resident-days: covered Part A days, plus Medicare Advantage or other managed care days where your contract makes the facility pay for drugs. Our article on who pays for drugs during a Part A stay covers the payer rules in detail.
What do you need to calculate it?
Three files, all of which you already have.
| Input | Where it comes from | What to watch |
|---|---|---|
| Facility-paid drug spend | 12 months of pharmacy invoices, line level | Keep only lines billed to the facility |
| Credits | Credit memos and later invoices | Match each credit to the month of the original dispense |
| Part A days | Census by payer, or cost report Worksheet S-3, Part I, line 1 | Count covered days only. The day of discharge is not a utilization day (Claims Processing Manual, Ch. 6, §40.3.5) |
| Managed care days with drugs in the per diem | Census by payer, plus each plan contract | Include only plans whose rate includes drugs. S-3, Part I, line 2 reports SNF HMO days (CMS-2540-24 instructions) |
| Contract terms | Pharmacy services agreement | Per diem pricing changes the math. See below |
What could your building recover?
Two numbers, instant estimate. No email needed.
How do you calculate it, step by step?
- Total the facility-billed lines for 12 consecutive months. Twelve months smooths out cycle-fill timing and seasonal census.
- Subtract credits for returns and discontinued drugs, assigned to the month of dispense. A credit that posts three months late should not make one month look cheap and another expensive.
- Set aside lines that should not be yours. Lines for residents who were Medicaid, private pay, hospice or discharged on that date go into a separate dispute list, not your cost. So do drugs on the consolidated billing exclusion lists, which are billed outside the Part A rate (SNF consolidated billing exclusions).
- Split what remains by payer: Part A residents and each managed care plan that includes drugs.
- Count the matching days from your census, by payer, for the same 12 months.
- Divide each payer's spend by its days. Then divide the combined spend by the combined days for a blended figure.
- Repeat monthly. The trend matters more than any single month.
What does a worked example look like?
Illustrative example. These figures are invented to show the arithmetic. They are not drawn from any client, facility or audit.
A 120-bed building averages 16 Part A residents and 3 Medicare Advantage residents whose plan includes drugs in the per diem.
| Line | Amount |
|---|---|
| Facility-billed pharmacy lines, 12 months | $356,175 |
| Less credits, assigned to month of dispense | −$12,400 |
| Less lines for residents not on a facility-responsible day (sent to dispute list) | −$9,800 |
| Facility-paid drug spend | $333,975 |
| Part A days (16 a day × 365) | 5,840 |
| Medicare Advantage days with drugs in per diem (3 a day × 365) | 1,095 |
| Facility-responsible resident-days | 6,935 |
| Blended cost per day ($333,975 ÷ 6,935) | $48.16 |
Split by payer, Part A spend of $289,080 over 5,840 days is $49.50 a day. Managed care spend of $44,895 over 1,095 days is $41.00 a day.
Two things stand out in this illustrative case. The $9,800 of lines for the wrong days is money to dispute, not cost. And if the building had divided by all 39,420 resident-days in the building (120 beds at 90% occupancy), it would have reported a cost per day under $10, which tells you nothing.
How does per diem pharmacy pricing change the math?
Some contracts charge a flat daily rate for each Part A resident instead of billing drug by drug. Then cost per day is set by contract, and the questions move: which days does the pharmacy count, what is carved out of the per diem, and are carve-outs billed at contract price. Our comparison of per diem vs. fee-for-service pharmacy pricing covers what to check. Under either model, the day count must match your census.
What does Medicare pay for drugs inside the Part A rate?
Medicare does not pay a separate drug amount. Under the Patient Driven Payment Model, drugs are part of the non-therapy ancillary (NTA) component, which is classified by a weighted score of 50 conditions and extensive services (CMS NTA fact sheet). The NTA rate is multiplied by 3.0 on days 1 to 3 of a stay and 1.0 from day 4 (CMS variable per diem fact sheet), because CMS found NTA costs are concentrated at the start of a stay.
That has a practical consequence. A building with shorter stays will show a higher drug cost per day, and that may be normal. Compare like with like: your own trend, or buildings with similar length of stay. For more on the payment side, see PDPM's NTA component and drug costs.
How does your number compare?
There is no national benchmark. The only public figure we know of is one operator's report of about $40 a patient-day in 2017 and $48 in 2018, in Becker's Hospital Review. Our Part A Pharmacy Report uses that range to estimate New York's facility-paid Part A drug spend at $184M to $221M a year (Pennywell estimate), and shows how the result moves if the true figure is $30 or $75 a day. The fuller picture of what is and is not known is in how much nursing homes spend on pharmacy.
Free report · New York editionThe Part A Pharmacy Report 202620 pages built from public CMS data: Part A days, drug cost estimates, the 20-point invoice checklist.Get the report
What mistakes skew the number?
- Dividing by total resident-days. The most common error, and the most misleading.
- Booking credits when they post. It moves cost between months and hides missing credits.
- Ignoring Part D billing during Part A stays. If the pharmacy billed a Part A resident's drugs to Part D, your cost per day looks low and your exposure is high. The OIG estimated Part D paid up to $465.1 million for such drugs from 2018 to 2020 (OIG A-09-21-03008).
- Mixing payers. A blended figure can stay flat while Part A cost rises and managed care volume grows.
For short-stay and rehab-heavy facilities, where Part A days are a large share of the census, each of these errors is larger in dollars.
Free · 48 hours · no integration
Get a free 48-hour pharmacy audit
- Send three files: invoices, census, contract
- See overbilling and Part A exposure, line by line
- BAA signed before any data moves
Frequently asked questions
What is a good pharmacy cost per patient day for a nursing home?
There is no published standard. One operator reported about $40 to $48 per patient-day for 2017 and 2018. Your own 12-month trend, split by payer, is a better guide than any outside figure.
Should I use total resident-days or Part A days?
Use facility-responsible resident-days: covered Part A days plus managed care days where the contract includes drugs in the per diem. Total resident-days include long-stay residents whose drugs are billed to Part D or Medicaid, which makes the result meaningless.
Can I calculate it from the cost report?
Roughly. Worksheet S-3 gives Part A and HMO days, and Worksheet A has Pharmacy, Drugs Charged to Patients and IV Solutions cost centers. Those cost lines are all-payer and classified differently by preparers, so invoices and census give a cleaner answer.
Why is my cost per day higher than last year?
Check four things in order: shorter lengths of stay, new high-cost therapies, fee or price changes in the contract, and lines billed for days that were not facility-responsible. The first two can be legitimate. The last two usually are not.
Get the 48-hour first look
Send three months of pharmacy invoices, your census and your pharmacy services agreement. Within 48 hours we calculate your cost per facility-responsible day, by payer, and show every line that does not match the census. Start with the free 48-hour audit or the savings calculator.